Kimpok Technology Co., Ltd
Kimpok Technology Co., Ltd. Specialist of Mobile Video Wireless Transmission
Add to Cart
1.2G FPV VTX 1.2Ghz 1.6W Wireless Video Transmitter Module for Drone Digital Transmission
Specifications
| Item | SPEC. |
| Frequency band | 1120-1360Mhz |
| Channel | 8 channels |
| Channel Frequency | 1120/1160/1200/1240/1280/1320/1360/1258(MHz) |
| RF power | 0. 1mW / 25mW / 200mW / 1600mW |
| Audio Sub-carrier | 6.5MHz/6.0MHz |
| Modulation type | FM |
| Frequency control | PLL |
| Audio sub-carrier control | PLL |
| Frequency Stability | ±100KHz (Typ.) |
| Frequency precision | ±200KHz (Typ.) |
| A/V (Ratio) | -26±2dB |
| S/N(Fo±3MHz) | >70d Bc |
| Channel Carrier error | 1dB |
| Antenna Port | 50 Ohms |
| Input format | NTSC or PAL |
| Video input level | 1V±0.2Vp-p type |
| Audio input level | 1V±0.2Vp-p type |
| Operating Temperature | -10℃~+60℃ |
| Input power supply | DC 7-36V |
| Output voltage | DC 7-36V ; DC5V |
| Profile dimension | 45.5mm(L)*35.8mm(W)*8.4mm(H) |
| Installation hole position | 30.5mm x 30.5mm |
| Net weight | 10g |
Precautions for Use
1. A certain space shall be reserved when the image transmission module is installed to ensure the air convection around the module and module cooling; otherwise, if the overheating protection of the module is started, the power emission will be lowered and even closed.
2. It is suggested to ensure correct voltage scope and correct positive and negative anodes before powering-on to avoid element burning-out.
3. It is suggested to confirm antenna has been installed at the RF output terminal before powering-on to extend the service life of module.
4. Please read the Instruction before use to ensure correct wiring and extend the service life of module.
